|Your cart is currently empty|
Microcell Ultra-Light Recoil Pad
The pads are made in Italy by Cervellati. They are also the supplier to Beretta, Perazzi, Blaser, FN, and other firearm manufacturers. Recoil absorption is higher than the typical rubber pad, with no "bottom out" effect, and the lightweight will not affect the balance of the gun.
Fitting Tips: Microcell pads have metal rings around the holes, 6 mm wide more than the hole. It is important to use a screw with a countersunk head. When you tighten the screw, it's more resistant than just the plastic of the plate.
To grind the toe end of the pad, it is necessary to use a high-speed machine with a 400 grit sanding belt for finishing. The product does not melt. However, failing to use a fine sanding belt might damage the pad's external appearance. Best results can be achieved by using a new and lubricated belt, and the stock should be gently drawn close to the belt.