Rubber Sloping Head Recoil Pad - 23.5mm (.93") Thick

Rubber Sloping Head Recoil Pad

• 23.5mm (.93") Thick
• 80-85mm (3.15-3.35 ") hole distance
• 45.2 (1.77") wide x 131mm (5.16") long
• Weight 143g (5.04 oz)
• Screws are not included 
  
  

The pads are made in Italy by Cervellati. These pads can be ground to match any stock butt, and their ergonomic shape guarantees great stability while raising the gun and during the shot.

Fitting Tips: Pads have metal rings around the holes, 6 mm wide more than the hole. It is important to use a screw with a countersunk head.  When you tighten the screw, it's more resistant than just the plastic of the plate. 

To grind the toe end of the pad, it is necessary to use a high-speed machine with a 400 grit sanding belt for finishing.  The product does not melt.  However, failing to use a fine sanding belt might damage the pad's external appearance.  Best results can be achieved using a new and lubricated belt, and the stock should be gently drawn close to the belt.