Microcell Sloping-Head Recoil Pad - 23.5mm (.93") Thick

Microcell Sloping-Head Recoil Pad

• 23.5mm (.93") Thick
• 80-85mm (3.1496" - 3.3465") hole distance
• 45.2mm (1.80") wide x 131mm (5.25") long
• Weight 65g (2.3 oz)
  
• Soft
• Screws are not included 

The pads are made in Italy by Cervellati.  Same extra-light material, same outstanding recoil absorption as the Microcell Ultra-Light recoil pads.  These pads can be ground to match any stock butt, and their ergonomic shape guarantees great stability while raising the gun and during the shot.

Fitting Tips:  Microcell pads have metal rings around the holes, 6 mm wide more than the hole. It is important to use a screw with a countersunk head.  When you tighten the screw, it's more resistant than just the plastic of the plate. 

To grind the toe end of the pad, it is necessary to use a high-speed machine with a 400 grit sanding belt for finishing.  The product does not melt. However, failing to use a fine sanding belt might damage the pad's external appearance.  Best results can be achieved using a new and lubricated belt, and the stock should be gently drawn close to the belt.