Manurhin MR 73 Parts

All parts are new from the factory. 

There are three generations of guns. The first was produced from 1973-1978. The second was produced from 1978-1996. The third is from 1996 to the present.

Both the first and second generations have three side plate screws. To determine whether you have a generation one or two, you will need to remove the side plate. Generation one uses a wire spring, which looks like a safety pin, to hold the cylinder lever pin in place. Generation two uses a flat spring to hold the cylinder lever pin in place. The cylinder lever pin for the first generation is no longer available. If you have to replace the cylinder lever pin for a generation one gun, you will need to replace the cylinder lever pin, the screw, and the side plate.

Here is a schematic of generation two (in French only): 
The newest generation has a serial prefix of HA and two side plate screws.  It also uses a flat spring but the cylinder lever pin is different from the previous generations.

Here is a schematic of the newest generation (French and English):

The following parts listed on the schematics are not available:  011, 012, 015, 052, 088, 097, 111, 114, 115, 116, 117, 123, 126, 143, 160, 175, 179, 180, 181, 185, 233, 406, 413, 616, 617, 620, 626, 632 and 640.  

Barrels, cylinders, and frames are not available. We do not have a gunsmith on staff and are unable to assist you with repairs or service of your gun.  Our sku number and the part number will match.  We have a number of parts in stock and others available by special order.  Special order parts may take anywhere from two to three months for delivery.  Sometimes, additional time may be required for factory production.  Special order parts are not returnable.

Prices are subject to change. 
Sorry, no international orders.

Refine Search